91203836-001.pdf

Machine Spindle Bearings
The spindle bearings as fitted to this machine are oil lubricated by means ofa fully automatic lubricating system.
The oil used must meet with Cincinnati Machine specification P38, seepages 3- 9 to 3- 11.
The lubrication unit can be found mounted at the rear of thecolumn.
For correct checking procedure of this unit, refer to Chapter 8 ofthis manual.
Fig. 46
Lubrication Chart - Air/Oil Spindle
Oil Specification
TYPE OF LUBRICANT
CINCINNATI
REFERENCE
DESIGNATION
LIGHT HYDRAULIC OIL AND LUBRICANT
A dual purpose premium grade rust and oxidation inhibited
petroleum fluid intended for service as an hydraulic oil and
lubricant.
28,8 - 35,2 cSt AT 40C149 - 182 SUS AT 100C Suppliers - European Market
SUPPLIER
PRODUCT NAME
and Affiliated CompaniesBritish Sun Oil Co. Ltd.
Suppliers - USA Market
P- 38 (HL- 32)
Light Hydraulic Oil and Lubricant
The approved products under Spec. P38 (1988) are suitable for use in allCincinnati Machine tools requiring this viscosity hydraulic oil.
CAUTION: Oil products that were formerly approved under Spec. P38 willnot necessarily meet the requirements for use in the machine tool hydraulicsystems.
Approved Product List
The following is a list of approved lubricants that meet the minimumrequirements of this specification. No inference should be made that allproducts are of the same quality.
SUPPLIER
PRODUCT NAME
Breslube - Division ofSafety- Kleen Canada Inc.
Chevron GST Oil 32Chevron Industrial Oil R&O 32 Page 3- 10
P- 38 (HL- 32)
Luscon Division Metal Lubricants Co. Luscon HF32; Hydralube 32 Mobil DTE Oil LightMobil Vactra Oil Light Unacal Turbine Oil XD 32Unacal Unax RX 32 Page 3- 11
Grease Specification
P64 - GENERAL PURPOSE GREASE (LITHIUM BASED) TYPE OF LUBRICANT
CINCINNATI
REFERENCE
DESIGNATION
LIGHT HYDRAULIC OIL AND LUBRICANT
A premium grade general purpose lithium base grease for
use in gear boxes, ball and roller typr bearings.
N.L.G.I. No 2.
WORKED PENETRATION (ISO 2137 & ASTM D 217) 93 - 187 cSt AT 40C500 - 1000 SUS AT 100F European - Market
SUPPLIER
PRODUCT NAME
and Affiliated CompaniesBritish Sun Oil Co. Ltd.
Chevron Dura- lith Grease 2Chevron Polyurea EP2 Page 3- 12
Suppliers - USA Market
P- 64 (X- 2)
Lithium Based Extreme Pressure Grease
Approved Product List
The following is a list of approved lubricants that meet the minimumrequirements of this specification. No inference should be made that allproducts are of the same quality.
SUPPLIER
PRODUCT NAME
Mobilith AW 2Mobilith SCH 220Mobilux EP 2 Molu Alloy 3022- 2Mollub Alloy BRB 572Tribol 4020/150- 2 Page 3- 13

Source: http://websystem.multipoint.se/Multipoint/files/235/p-64-p38.pdf